steam boilers for paper making

Run standard gas hot water boiler you know? Run standard gas hot water boiler you know? A. Each boiler must be automatic ignition process. II. Safety device for each boiler must ensure reliable, including flame protection, gas overpressure protection, over-temperature protection furnace, ultra-low water level protection. III. According to state regulations safety valve to send technical supervision departments for inspection once a year. IV. Each boiler installed system should ensure reliable and accurate pressure gauge and check them regularly. V. The conditions of this building system, the operation to ensure that water pressure ≧ 0.10Mpa, to ensure that water pressure ≧ 0.08Mpa, and to ensure adequate water pressure. Six temperature requirements: (1) the outlet temperature of the boiler does not exceed 85 degrees Celsius. (2) According to the heating season should ambient water temperature regulating system, to set the system temperature trap temperature is valid, the steady heat, water temperature not less than 50 degrees at night, daytime temperature reached 55; 60 degrees Celsius. (3) Heating temperature of the daytime running balancing tank is not less than 60 degrees Celsius, 55 degrees Celsius temperature not lower than the temperature over night balancing tank is not less than 55 degrees Celsius, at a temperature not lower than 50 degrees Celsius. According to ambient temperature, at any time to adjust the operating temperature. Seven boiler water requirements: (1) the operation of the furnace is not less than the water pressure 0.8bar. (2) system to timely pay, the minimum water pressure of not less than 0.08Mpa. (3) normal discharge, gas discharge, the normal equipment and systems to ensure reliable. (4) water treatment to standards, water quality testing report should be filed. VIII. Gas inlet pressure should ensure 100Kpa to 110Kpa, whereby pressure to clean inlet filter and setting the gas pressure from the hive property management network. IX. Boiler room ventilation should be regularly and ensure clean environment and equipment. Run standard: a must for each boiler with automatic ignition process. II. Safety device for each boiler must ensure reliable, including flame protection, gas overpressure protection, over-temperature protection furnace, ultra-low water level protection. III. According to state regulations safety valve to send technical supervision departments for inspection once a year. IV. Each boiler installed system should ensure reliable and accurate pressure gauge and check them regularly. V. The conditions of this building system, the operation to ensure that water pressure ≧ 0.10Mpa, to ensure that water pressure ≧ 0.08Mpa, and to ensure adequate water pressure. Six temperature requirements: (1) the outlet temperature of the boiler does not exceed 85 degrees Celsius. (2) According to the heating season should ambient water temperature regulating system, to set the system temperature trap temperature is valid, the steady heat, water temperature not less than 50 degrees at night, daytime temperature reached 55; 60 degrees Celsius. (3) Heating temperature of the daytime running balancing tank is not less than 60 degrees Celsius, 55 degrees Celsius temperature not lower than the temperature over night balancing tank is not less than 55 degrees Celsius, at a temperature not lower than 50 degrees Celsius. According to ambient temperature, at any time to adjust the operating temperature. Seven boiler water requirements: (1) the operation of the furnace is not less than the water pressure 0.8bar. (2) system to timely pay, the minimum water pressure of not less than 0.08Mpa. (3) normal discharge, gas discharge, the normal equipment and systems to ensure reliable. (4) water treatment to standards, water quality testing report should be filed. VIII. Gas inlet pressure should ensure 100Kpa to 110Kpa, whereby pressure to clean inlet filter and setting the gas pressure from the hive property management network. IX. Boiler room ventilation should be regularly and ensure clean environment and equipment.

Directly supplying the electric regenerative heating system heating boiler thermal efficiency of regenerative higher circulating heating system, which is suitable for rapid thermal electric heating boiler system, includes in addition to the advantages of directly supplying regenerative heating system outside also has the characteristics of high flow circulating heating using heating elements facilitate cooling and heating costs of the user, the system is also more safe and reliable operation; heating the heat storage heating system, which is a dual circulation heating system heating, induction heating operation, high thermal efficiency, safe, stable, reliable, high water hardness suitable place. Direct heating type heat storage system for a relatively small power electric heating boilers, the advantage that the pipeline system is simple, generally without the need for pumps, storage tank used to supply water, the water temperature is relatively stable, the instantaneous heating water unlimited power of the electric boiler to meet more water. Direct heating system, which is typically a small electric heating boiler heating system that uses regenerative operation performed for home heating, the advantage of the system is simple, fast heating, cold water can be heated directly from the water or from the high water tank water.

The United States is our national enterprise, one of the world's top 500, with very bright glory on the world stage. US air-conditioning as a subsidiary branch, with a very large market competitiveness. 2016, Hubei US air-conditioning due to market demand to expand production lines, need to purchase steam boilers for paper making to provide energy support for the new production line. After the boiler industry for a number of enterprises contrast, is determined to cooperate with the fast boiler, buy a whole 10 tons of steam condensing gas steam boiler (WNS10-1.25-Y.Q).

4 tph WNS series gas-fired fire tube boiler project for chemical industryIn the manufacturing process of all kinds of chemical auxiliaries, the key process of concentration needs steam support produced by steam boilers for paper makings, which direct affect the quality and performance of chemical auxiliaries. Jiangsu Han Kuang Industrial Co., Ltd. has become one of the national largest production bases of petrochemical auxiliaries. With a sudden increase in market demands, Han Kuang Industrial decided to introduce a branch of equipment that equipped with automation systems to accelerate the intelligent transformation of environmental protection and safety. Han Kuang Industrial planned to purchase environmental friendly and high efficient steam boilers featuring automatic and safe operation. After a series of careful and rigorous market research, Han Kuang Industrial reached cooperation intention with ZOZEN and ordered 2 sets of 4 tph WNS series condensing gas-fired boilers (WNS4-1.6-Q). The full automatic intelligent control ensures the long-time safe and stable operation of boilers, which save a lot of operational and maintenance cost  for Han Kuang Industrial. More than that, this series of gas-fired steam boilers is ZOZEN typical energy-saving and environment-friendly product. The large-diameter corrugated furnace in conjunction with the advanced low NOx burner can easily reduce the NOx emission below 30 mg/m³; at the same time, ZOZEN engineer equipped energy-saving devices on the flue tail of the boiler to reduce the exhaust gas temperature to 60 degrees, enabling the thermal efficiency up to 98%. The boiler complied with the concept of energy conservation and environment protection as well as providing the enough heat source that production line needs.