water boiler 110v 60hz industry

Yangzhou City in Jiangsu Province, the municipal government issued a notice of 2019 annual remediation tasks boiler, with the text published a list of boiler regulation, as follows.

3, the nitrogen gas boiler oxide (NOx) emission limit is not higher than 50 mg / m transformation, in accordance with other indicators of "boiler air emission standards" in the gas-fired boiler particularly performed emission limits.

(1) prohibits blended with other fuels such as coal, bags and other supporting efficient dust removal facilities, and effectively discharge standards. Emission standards in accordance with "boiler air emission standards" in coal-fired boilers particularly performed emission limits.

Full implementation of the above steam 2,65 t / h coal-fired boiler transformation ultra-low emission, soot, sulfur dioxide, nitrogen oxides, respectively, 10 mg / m, 35 mg / m, 50 mg / cubic meter.

3, disable all kinds of close small coal-fired facilities (tea boiler and furnace operating coal-fired stove, rural production, aquaculture and other coal-fired facilities), switching to natural gas, electricity, solar and other clean energy. In remote rural areas, could be replaced by forming biomass as a fuel, but must use a professional boiler, supporting efficient dust removal facilities, to ensure that pollutant discharge standards, emissions standards refer to "boiler air pollutant emission standards" in particular coal-fired boiler emission limits carried out.

4, a low nitrogen gas boiler and treatment for the transformation, the installation of low NOx combustion by the low NOx combustion mode, etc., to ensure that the nitrogen oxide emission limit is not higher than 50 mg / m. Other indicators according to "boiler air emission standards" in the gas-fired boiler particularly performed emission limits.

5, forming a comprehensive remediation biomass fuel boilers, biomass fired boiler clean-up does not meet the special requirements of the boiler, not supporting a biomass fired boiler emissions and efficient dust removal facilities of non-compliance. To meet the special requirements of the boiler and supporting efficient dust removal facilities, the establishment of accounting and retain more than one year, emission standards refer to "boiler air pollutant emission standards" emission limits in particular the implementation of coal-fired boilers. More than 10 tons of steam installation of gas-line monitoring instruments, and networking with the environmental protection department. Located in the city built-up area forming ultra-low emission biomass boilers implement reform.

6, bulk coal sales within the city limits are all clear according to the law, the use of bulk coal user implementation of the "coal to electricity" for street vendors and other "coal to gas" campaign, a pin number management. At the same time, prohibiting the establishment of long-term supervision mechanism bulk coal, non-bulk coal inflows.

The quality of natural gas boilers also have a strong relationship with the device operating parameters and presets. If the operator of the gas-fired equipment to adjust each parameter does not match with the environment, or confusing sequence of operations may also lead to natural gas boilers in the course of the system Caton, excessive condensation water, low pressure or no change in temperature abnormal situation. Therefore, the relevant personnel to operate natural gas boiler must be in accordance with the instruction proper operation boiler, preferably with professional instructors and auxiliary operations. Third, the repair and maintenance of gas boilers

(4) Horizontal combustion WN (the horizontal) (5) Horizontal combustion WW of (lying outside) (6) horizontal heat pipe WR (horizontal hot) water tube boiler vertical single drum DL (stand-alone) single-drum longitudinal mounted the DZ (single-longitudinal) single drum transverse formula DH (single transverse) double drum vertical type SZ (double vertical) horizontal type double drum SH (double cross) rows of stationary furnace G (solid) activity grate hand H ( live) feed grate A (down) the chain grate L (chain) reciprocating grate W (to) pumping plate lifting furnace C (pumping) chamber burners S (chamber) gas furnaces half B (semi) boiling furnace F ( boiling) 4, boiler pressure applications because unpressurized pressure hot water boiler 110v 60hz industry, so to link with the atmosphere, and the temperature should not exceed 100 ℃. The main areas of use: place heating, bathroom, nursery, electroplating, chemical without high temperature (higher than 100 deg.] C) of. However, once the system layout is unreasonable, without the openings communicating with the atmosphere communicating pipe or valve blockage or installed, it will cause pressure hot water boiler, having a certain degree of risk. 5, pressure boiler water quality: Water pressure boiler required to follow "industrial boiler water quality standards," the specific requirements in the following table: 7, the boiler operating temperature and pressure: The "small hot water boiler and pressure monitoring Safety Regulations" regulations, the atmospheric outlet of the water heater temperature should not exceed 85 ℃, the return water temperature of 60 ℃. Low pressure type water temperature can not exceed to 95 ℃, return water temperature is 70 ℃? Because in security considerations, to prevent heating of the hot water temperature is too high so as gasification, the system will affect the circulating pump running, the system pressure rise; and if failure or insensitive because the thermometer is not allowed to set the temperature are likely to cause system overpressure thus a security risk. Pressure hot water boiler thermometer scale used rated water temperature of 1.5 to 2 times the rated water temperature and the temperature difference between nominal water temperature not more than 20 ℃.

Boiler expensive? To address this issue, is not possible to generalize, a common form of the transformation of coal-fired boiler is a low-nitrogen gas boilers and gas boilers transformation. The transformation of different directions, grasp the transformation of the overall price, naturally different. If the original boiler appears time has run longer, and parts of aging, lack of overall boiler output and so on, basically the cost of renovation is relatively high, most of them will be dismantled renovation, demolition and reconstruction would mean a new boiler. The cost is the cost + cost New dismantled. If that is the transformation of low-nitrogen gas boiler and a series of operations, or the overall operation of the boiler better preservation of the original elements, under the premise of only part of the transformation, the transformation of nature is relatively low cost, after reform and improve operating results, business industry to enhance production efficiency, naturally also return costs. So, to say the part of the analysis confirms that your boiler or not, is to be judged and accounting based on the actual analysis of the boiler site.