boiler with water treatment

Horizontal boiler with water treatment fuel tube defines the combustion gas boiler Classified DESCRIPTION internal combustion type first horizontal tube boiler (1) horizontal tube boiler combustion, which is defined as equal to the vertical axis of the boiler furnace housing floor and the combustion chamber body. Characteristics of the hearth (2) Horizontal combustion tube of the boiler combustion chamber of the boiler. Placed in the furnace burner nozzle, the high-temperature combustion of tobacco extends back to the furnace. Reentry space (reburn chamber) after leaving the furnace, into the second return channel near the recycled (smoke duct), the second time re-entry [2] reentry times, three secondary offset, recycled, the total number of retracement no more than four times, the most common three melted down. This type of boiler can be classified into a dry back boiler and all wet back boiler, the type of re-entry structure according to the rear space of flue gas. Back burning boiler flue gas space is made of refractory material reentry, all wet back boiler flue gas space defined by the reentry of reburning immersed in the water chambers. In addition, there is again a central combustion boiler: the rear wall of the furnace tank is sealed within the furnace shell, the flue gas back to the front by the inner wall of the tank furnace. This boiler can also be considered to be fully wet back boiler. Although dry Boiler simple structure, easy to damage the refractory hearth rear, rear tube plate often directly from the high temperature flue gas cleaning, waste type belong, and is currently almost no manufacturer it. While the all-trans Boiler wet complicated structure, but it avoids the problem of the smoke seal reentry space more suitable for combustion in a slight positive pressure. Therefore, at present in most plants, this type of boiler mostly all wet-back type 2. When the boiler water tube boiler capacity of Ge / 30ampt / h, the indicators are much better than water tube boiler fire boiler. The only caveat is that the combustion characteristics of gas requires a slight positive pressure ventilation, and therefore the furnace wall are high strength and tightness. The main types of water tube boiler of D-A and O A common characteristic of these three tubes are horizontally arranged, the horizontal burner installation, easy operation and maintenance, the small height dimension, the length of the flexible and suitable for continuous production of boiler tubes. D-type boiler tube vertical type double boiler, water wall right side, the left (right) to the convection bank, economizer, or superheater O type is needed between the double boiler drum vertical tube type, the tube pan long and short pot pipe. Both sides of the front waterwall tubes bent to each other at a lower portion, and is connected to the lower header. The front portion of the burner is provided with a one-pot type A longitudinal tube. Furnace and a conduit between the convection tubes on both sides of the pot and the lower header tube composition. A burner provided in the front portion. Boiler filter belt. 3 may be provided at rear of the boiler. Vertical boiler vertical axis is a vertical boiler case of small vertical boilers. It is generally disposed on the burner top. A central hearth furnace flue gas back to the bottom cover, and washed administered formed by heating, to separate the vapor from the upper portion; burner can also be provided in the bottom, the combustion in the furnace, and then rinsing the uprising pipe, water heating the tube within the housing.

4, the boiler with water treatment room can not be placed flammable flammable material, highly corrosive gases and volatiles.

Third, after the completion of the installation inspection.

1, after the successful landing of boiler installation, you also need to conduct a comprehensive inspection and maintenance work, ensure that the boiler will not fail when put into operation in late.

Secondly, both steam and hot water heating pipes compared to heating pipes, heat loss caused by the former will be smaller because of the need for continuous blowdown steam boiler with water treatments and regular sewage, while the hot water boiler requires only a small amount of sewage on a regular basis.

Car accessories types of complex processing, such as the interior wall Peng, floor, seats, instrument panels, sound systems, many processes required in a high temperature environment, the temperature becomes optional metrics wind Visteon hot water boiler with water treatment. It is reported that Dongfeng Visteon existing boiler equipment can not reach the growing production needs, the introduction of fast boiler production of two parties often piezoelectric hot water boiler (CWDR1.8-95 / 70-II) in 2017.